PersonalSource™ Floor Model UPS
5000 VA and 6000 VA
·
True
On-Line Design
· Input
Power Factor Correction
· Built-in
Surge Protection
· Microprocessor
Control & Communications
· Compact
size, lightweight
· Wide
input voltage window
·
High Efficiency
·
Over crest ratio indicator
· RS232
Communications
· Site
Wiring Fault indicator
· Green
Mode Operation
· Compatible
with generators
· Optional
internal SNMP/HTTP
· Optional
Extended Battery Time
·
Optional Frequency Conversion
PersonalSource 600 to 6000 VA Front Views
True On-line Design
A recent Bell Laboratories study indicates that blackouts account
for less than 5% of power disturbances. The other 95% consist of surges, noise,
sags and brownouts. Equipment connected to utility power experiences an average
of 128 such events each month. These events can disrupt proper operation of
sensitive computer based equipment, decreasing productivity and creates
unnecessary production, service and data recovery costs.
A True On-line UPS is the only design that can provide the maximum
protection against major power problems. This is accomplished through converting
the incoming AC utility voltage to a DC voltage. From this DC voltage, an AC
voltage is then completely regenerated by the UPS, providing a clean,
well-regulated source to your equipment, thereby eliminating power related
problems. This solidstate generator sets the True Regenerative On-Line UPS apart
from all other Line-interactive and Off-line designs, which leave your sensitive
equipment connected directly to the dirty utility power 99+% of the time. If
your equipment is operating in a “Mission Critical” application, then you
need a True On-line UPS and the PersonalSource is the best choice in True
On-line UPS technology.
Input Power Factor Correction
All PersonalSource Series
models include state of the art Input Power
Factor Correction. This greatly reduces the amount of current demanded from
your building wiring system, yielding an efficient, “building friendly” UPS.
Microprocessor Control
The PersonalSource
UPS incorporates advanced microprocessor technology. This technology makes
possible a high level of internal UPS control as well as system information,
data logging, self-diagnostics, SNMP and enhanced computer communication through
any RS-232 port.
SNMP/HTTP Remote
Management Support
An optional SNMP/HTTP
Agent board is available for direct installation into all PersonalSource models.
The SNMP/HTTP Agent provides for direct connection of the UPS to any 10Base2 or
10BaseT Ethernet LAN.
Overall, the PersonalSource Series is uniquely qualified for critical systems combining advanced modular design features with highly
reliable construction.
Request Information